molecular interaction with an affordable
A simple and flexible system that’s easy for
you to configure and modify with off-the-shelf
SPR is a highly specific and sensitive technique based on a surface designed for
molecular interaction between a ligand and analyte of interest. This figure
represents a typical planar surface based on a self-assembled monolayer of
polyethylene glycol (PEG) and carboxylic acid polyethylene glycol terminal
alkanethiolates on gold. Sensor slides with a variety of surfaces are commercially
available, or can be prepared from purchased or synthesized chemicals.
50 nM Gold Layer Glass Slide
Flowcell The flowcell creates the reaction space and conditions for molecular
interactions. Dimension variables affect velocity over the surface and
surface area exposed. A large volume/surface area with average flow
or no flow may be desirable for ligand fishing where the aim is to
isolate a specific molecule from a mixture for further study e.g. mass
spectrometry. Kinetic rate experiments require small volume, high
velocity flow to avoid mass transport issues. Reichert offers several
sizes of flow cells and a static cavity type. Additionally, the
prism/flowcell interface design allows the simple attachment of a
flowcell of your own design – e.g. to do electrochemistry and SPR.
Software National Instruments LABview software is used to control the
SR7000 and report/archive data. This open approach allows users to
modify the program to their specific needs where desired. As an
experiment is being run, the results are reported in real time to the
computer screen. The figure is an example of this data. Data can be
exported into Excel, Origin, GraphPad Prism or a number of other
programs like CLAMP (Center for Biomolecular Interaction Analysis,
Univ. of Utah) or WINSPALL (WINSPALL, Juergen Worm, MPIP Mainz)
Pump A key criterion in pump selection is the type of experiments that will
be run. Typically, a high quality syringe pump provides the lowest
noise, most stable baselines and even flow for kinetic and equilibrium
analysis. A peristaltic pump can be used as a lower cost option, to
flow cleaning solutions, and to continually recirculate analytes for
long time span equilibrium experiments.
Fluidics Designed to use low cost off the shelf HPLC valves and tubing. This allows
for easy change over if contamination or damage occurs. Additionally,
there is a range of options that allow for selection of the most appropriate
materials and tube sizes for the biomolecules and chemicals to be used.
New Surface Plasmon Resonance Instrument:
• Flexible: you design it to do your work
• Response vs. time and reflectivity data
• For kinetics (on, off, equilibrium), relative affinity,
sequence recognition, concentration, ligand fishing
• For method development…before running more
• Extremely sensitive: Savitzky Golay Smoothed Data
rms Noise = 0.45 µRIU = 0.33 RU = 3.3e-05 deg.
(Raw Data rms Noise = 0.97 µRIU = 0.71 RU =
• Excellent baseline stability: Maximum drift 3.1
µRIU/hour [1 µRIU = 0.73 RU = 7.3e-05 Deg]
• Given ready chemistry (slide with surface and analyte
to test against it), the instrument can be up and
producing data within an hour out of the box.
This system provides an easy-to-understand and easy-to-use platform for monitoring molecular interactions
The easiest way to understand this process is to walk
• Flow analyte with the binding partner or target molecule
through an experiment. These major steps are:
in it over the SAM. Examples of what can be done are
• Form a self-assembled monolayer (SAM) on the gold
flowing different concentrations of the binding molecule
surface of the glass slide. This is usually done off line
to determine rate constants and equilibrium binding
of the instrument or purchased ready to use.
constants, “fishing” a molecule out of a soup of molecules
• Immobilization of a ligand to the SAM. The ligand
to capture it for additional analysis, or determining the
is usually one half of the chosen binding pair
concentration of a molecule in solution.
Protein Immobilization on the Sensor SurfaceProteins may be immobilized on the surface with wide varietyof chemistries used extensively in affinity chromatography. Thisresponse vs. time chart shows a typical protein immobilizationon a carboxyl sensor surface. The mixture of EDC/NHS is flowedover the surface to transform surface carboxyls to NHS esters. Protein dissolved in a Sodium Actate Buffer is then injectedover the surface. An amine in the protein displaces the NHSester forming an amide bond with the surface. Ethanolamine is used to deactivate the unreacted NHS esters.
Kinetic DataThe SR7000 produces real time kinetic data of biomolecularbinding including Protein/Protein, Protein/DNA, DNA/DNA,Protein/Drug and Receptor/Ligand interactions. The Figureshows the time response of Human Serum Albumin binding to Mouse Anti-Human Serum Albumin covalently immobilizedon the sensor surface. The forward (association) and reverse(dissociation) reaction rates at various concentrations of HumanSerum Albumin are fit to a binding model – For Example 1: 1binding (A + B AB). The mathematical fits provide rate constants (kon, koff) and the thermodynamic equilibrium association and dissociation constants (KD KA).
SPR Resonance Minimum DataReflectivity Vs. Angle data showing the SPR reflectivity minimummay be downloaded from the SR7000. This data may be comparedto models of the reflectivity of optical multilayer systems basedon Fresnel calculations. The equations are used in predictingthe shift in the SPR angle i.e., the angle at which a minimum in reflectivity is observed in an SPR variable angle experiment. Shifts are predicted by the thickness and refractive index of thinfilms on the SPR sensor surface. The curves show the change in the SPR reflectivity minimum before and after covalentimmobilization of 1.5 ng/mm2 Human Serum Albumin to a self-assembled monolayer on the gold sensor surface. This shiftcorresponds to a refractive index change of 2000 µRefractiveIndex Units (µRIU).
Small Molecule Binding demonstrates theSR7000’s “Sensitivity” and “Baseline Stability”The figures show Warfarin (MW 308.3 Da) binding to humanserum albumin immobilized on the sensor surface and a controlsurface. The response change of the control surface is due tothe mass effect of the Warfarin in solution. The binding ofWarfarin to Human Serum Albumin reaches equilibrium toofast to measure reaction rates.
Equilibrium DataThe flexibility of the SR7000’s fluidic system allows configurationof the instrument for extremely fast or very slow thermodynamicequilibrium experiments. Fast-on, fast-off reactions and injectionslasting an hour or more are possible by varying sample loop size,tubing length/size from the injector to flow cell and by varyingflow rates over a wide range. Long-term equilibrium experimentsusing limited sample are possible by recirculating analytes with aperistaltic pump. With the SR7000 it is possible to conduct theseexperiments over a wide temperature range.
The chart shows a Langmuir fit of equilibrium data for warfarin(MW 308.3) binding to human serum albumin immobilized onthe sensor surface.
SR7000 Baseline Stability and NoiseThe SR7000 Uses a 3700 Pixel ccd array to image the SPR reflectivityminimum. The large number of pixels coupled with proprietaryillumination control and image analysis algorithms translates tohigh resolution and low noise.
SR7000 Temperature ControlTemperature Range: 10 to 90 Degrees Centigrade, temperatureis held to +/- 0.015 Deg. C.
The SR7000’s sensor surface temperature is programmable overthe entire temperature range. Users may select starting andending temperatures, the time to go from the start temperatureto the end temperature, and the size and number or steps totake in getting from temperature A to Temperature B. Thechart below demonstrates this unique feature of the SR7000.
(0.01” I.D.Tubing)7.5 µL (0.005” I.D.Tubing)
Catalog No. Description
Includes instrument, control and data collection software,micro flow cell, static cavity sample cell
Includes injection valve, solvent select valve, valve stand, all required tubing and fittings
PEG/PEG COOH terminal alkanethiolate self-assembled monolayer on gold
*The precision and accuracy of measurements are largely dependent upon operator skill, laboratory equipment, temperature control, the accuracy of calibration standards, chemical stability of sample, and the physical characteristics of the sample. A product demonstrationis suggested to validate the true precision and accuracy of laboratory equipment for specific samples. Due to a policy of continuous development, we reserve the right to change specifications without notice. For more information, contact Reichert Analytical Instruments. Reichert, Inc. Important Notice
For your own protection, only purchase your
Tel: (716) 686-4500 • Fax: (716) 686-4555
Reichert Analytical Instruments from and have them
serviced by an Authorized Reichert Distributor. www.reichertai.com
INTERMITTENT DHT ADMINISTRATION ENHANCES EFFECT OF INVOLVEMENT OF THE ESTROGEN RECEPTOR ˟ IN GENISTEIN- DOCETAXEL IN A XENOGRAFT MODEL BY MODULATION OF ER ˟ , INDUCED EXPRESSION OF P21WAF1/CIP1 IN PC-3 PROSTATE AR AND NEK2 CANCER CELLS Tinzl M.1, Dizeyi N.1, Zhang Y.1, Ribero D.1, Bjartell A.1, Marberger M.2,Kentaro M., Tomoaki T., Hidenori K., Katsuyuki K., Tatsuya N. Osaka
The Buzz on Caffeine for Sport By Carole Dobson National Trainer RPM & BODYPUMP What is caffeine? Caffeine is an organic compound found most commonly in the seeds of coffee plants. It is the most widely used drug in the world, found in coffee, colas, caffeine pills, some medications, and herbal products using the term guarana (seed, extract, or root), coffee beans, mate, and c